The MKH 416 transformerless, RF condenser is designed as a combination of pressure gradient and interference tube microphones. Very good feedback rejection, low proximity effect, 130 dB/SPL. Rugged and resistant to changing climate conditions. Ideal for boom, fishpole, and camera mounting.
Its excellent directivity and compact design, high consonant articulation and feedback rejection make the MKH 416 a superb all-around microphone for film, radio and television, especially for outside broadcast applications.
Interference Tube Principle
Pressure gradient receiver with short interference tube
Employs RF-technology to control residual microphone noise. Optimizing the transducer's acoustic impedance results in a further improvement in low noise performance.
The RF-design yields exceptionally low noise levels and is virtually immune to humidity and moisture.
The comparatively low RF-voltage across the elements of the transducer also eliminates arcing and DC-bias creeping currents.
Hypercardioid at low and medium frequency, above 2kHz approaches lobar pattern
Very low inherent self-noise
High sensitivity
Transformerless and fully floating balanced output
Rugged, suitable for adverse climatic conditions
Matt black all-metal body
Increased directivity
Optimum S/N ratio
Lower gain on input channels required
Lowest noise and greatest signal stability
Highly immune to humidity in all conditions. Extremely stable.
Visually "low key"
| Dimensions | 9.84 x 0.74 (250 x 19mm) LxDiameter |
|---|---|
| Element | N/A |
| Polar Pattern | Supercardioid/Lobar |
| Frequency Response | 40 Hz - 20 KHz |
| Impedance | N/A |
| Open Circuit Sensitivity | N/A |
| Max Input Sound Level | N/A |
| Dynamic Range | 117 dB |
| Signal to Noise Ratio | 81 dB |
| Power Requirement | Phantom Power 48v, (± 12v) |
| Weight | 5.82 oz. (175 g) |
| Output Connector | XLR-3M Type |
| Low Frequency Roll Off | None |
| Switches | N/A |
| Battery Type | N/A |
| Battery Current / Life | N/A |
Sennheiser MKH-416
UAE
KSA
